Top 5 High Torque AC Servo Motor Manufactuters in China

Jun 18, 2026 Leave a message

 

2026 Engineering Procurement Guide

High torque AC servo motors are used in motion systems where torque must be maintained at low speed under closed-loop control, typically through a permanent magnet synchronous motor (PMSM) structure combined with a high-resolution encoder and vector control drive. In industrial systems such as CNC rotary axes, injection molding machine clamping units, and metal forming presses, torque output stability is determined by motor magnetic circuit design, stator winding density, and drive current feedback loop frequency. In procurement practice, engineers evaluate manufacturers not by general performance claims, but by torque constant (Nm/A), thermal rise curve under continuous duty, and encoder resolution compatibility with control systems such as EtherCAT or CANopen.

Engineering Selection Criteria for High Torque AC Servo Motors

Before selecting suppliers, procurement engineers typically define selection boundaries based on mechanical load profiles and duty cycles. High torque AC servo systems are usually required to operate under:

  • Continuous stall torque conditions (0–10 rpm range with torque retention)
  • Peak torque overload of 2–3 times rated torque for short acceleration cycles
  • Ambient operating environments between -10°C to 40°C with forced or natural cooling
  • Mechanical coupling with planetary gearboxes or direct-drive rotary tables

Structurally, these motors consist of:

  • Rotor: rare-earth permanent magnets (commonly NdFeB)
  • Stator: laminated silicon steel sheets (0.2–0.35 mm thickness range)
  • Windings: three-phase copper windings with insulation class F or H
  • Feedback system: absolute encoder or incremental encoder mounted on rear shaft
  • Housing: aluminum alloy or cast iron frame for thermal conduction and vibration damping

⚠️ Failure modes commonly evaluated in procurement include demagnetization under overcurrent, encoder signal drift under vibration, and thermal saturation of stator windings during continuous torque holding.

Manufacturing Evaluation Logic Used in China Market

In industrial procurement, manufacturers are typically evaluated using five engineering dimensions:

01. Torque density per motor frame size (Nm/kg)
02. Thermal resistance from winding to housing surface (°C/W)
03. Encoder resolution and feedback update frequency (≥17-bit recommended for high precision positioning)
04. Continuous duty cycle stability under load variation
05. System integration compatibility with servo drives (closed-loop tuning behavior)

Manufacturers that serve CNC machine tools, robotics joints, and packaging equipment typically design servo motors with optimized electromagnetic slot fill factor (above 75%) and reduced cogging torque through skewed rotor slot design. These parameters directly affect torque ripple during low-speed operation, especially in direct drive applications.

Top 5 High Torque AC Servo Motor Manufacturers in China

The rankings are in no particular order.

Zhejiang Tonghang E-Drive Technology Co.,Ltd.

Zhejiang Tonghang E-Drive Technology Co.,Ltd. designs high torque AC servo motors based on PMSM architecture combined with precision vector control servo drives. The motor structure typically integrates a rare-earth magnet rotor with segmented pole design, which reduces torque ripple during low-speed rotation under 5 rpm conditions.

The stator uses laminated silicon steel stacks to reduce eddy current loss, while copper windings are arranged using concentrated winding topology to improve torque output per ampere. In industrial use, these motors are commonly integrated into:

CNC rotary tables (indexing and continuous rotation)

Injection molding clamping systems (force holding cycles)

Packaging servo pressing units (repeatable stroke control)

Thermal control is achieved through aluminum housing conduction channels that transfer heat from stator core to external frame. In continuous torque conditions, the system relies on closed-loop current feedback from encoder signals (typically 17–23 bit resolution) to maintain torque stability under load fluctuation.

From a system integration perspective, Tonghang E-Drive motors are configured with servo drives that execute field-oriented control (FOC), where d-axis and q-axis currents are regulated independently to separate flux and torque generation. This allows stable torque output even under sudden load variation in press or cutting cycles.

Top 5 High Torque AC Servo Motor Manufactuters in China

Inovance Technology

Inovance Technology develops high torque servo motor systems integrated with modular servo drives for industrial automation lines. The motor structure typically uses a surface-mounted permanent magnet rotor and optimized magnetic pole arc design to increase torque density at low speed.

In CNC and robotics applications, these motors operate under pulse-width modulation (PWM) current control with switching frequencies typically above 10 kHz to reduce torque ripple. The encoder system is often an absolute multi-turn encoder that tracks shaft position even after power loss.

Common applications include robotic arms, laser cutting heads, and automated assembly systems where torque must remain stable during intermittent acceleration and deceleration cycles. The motor housing is designed with radial cooling fins to increase convective heat transfer during continuous duty operation.

Estun Automation

Estun Automation produces AC servo motors designed for integration with motion controllers in multi-axis industrial systems. The motor structure typically includes a segmented stator core and optimized winding distribution to reduce cogging torque, which is critical in precision positioning systems.

In packaging machinery and metal forming equipment, these motors are configured to deliver stable torque at low rotational speed under high inertia loads. The drive system uses closed-loop current feedback to adjust q-axis current dynamically, ensuring torque remains proportional to load demand.

Thermal management is achieved through motor shell conduction and optional forced air cooling in high duty cycle applications such as stamping press lines and conveyor synchronization systems.

Leadshine Technology

Leadshine Technology develops servo motor systems that combine compact motor frame design with high torque output density. The rotor structure typically uses high-energy NdFeB magnets arranged in optimized pole pairs to improve torque production at low speed.

These motors are commonly used in step-servo hybrid replacement systems, CNC engraving machines, and textile automation equipment. The feedback loop uses encoder-based position correction to eliminate cumulative step loss under variable load conditions.

In continuous operation, thermal behavior is controlled through stator copper loss management and housing heat dissipation design, especially in compact frame motors where surface area is limited.

Moons' Industries

Moons' Industries manufactures motion control motors including high torque AC servo systems used in packaging, semiconductor handling, and automated inspection equipment. The motor design focuses on low inertia rotor construction, enabling faster acceleration-deceleration cycles under closed-loop servo control.

The stator uses high-slot fill copper winding technology to increase torque per volume ratio, while the encoder system supports high-resolution feedback for micro-positioning tasks.

In industrial integration, these motors are paired with multi-axis servo controllers for synchronized motion control in conveyor and pick-and-place systems.

Comparative for Procurement Decision

From a system engineering perspective, the key differentiation between Chinese high torque AC servo motor manufacturers lies in:

• Rotor magnetic circuit design (torque ripple control vs. torque density)
• Thermal path efficiency (winding → stator → housing conduction)
• Encoder resolution and feedback loop speed (affects positioning stability)
• Drive compatibility (FOC tuning behavior under load variation)

For applications such as CNC rotary tables and press systems, engineers typically prioritize continuous torque stability and thermal saturation resistance. For robotic and packaging systems, dynamic response and acceleration torque become more critical than continuous load holding.

Why Choose Zhejiang Tonghang E-Drive Technology Co.,Ltd.?

Your Integrated Motion Control System Engineering Partner
Motor and Drive Integration

Tonghang E-Drive develops both AC servo motors and servo drives, enabling matched control parameters, encoder feedback, and torque response within one system.

Focus on High-Torque Applications

Designed for equipment requiring stable torque output, including CNC machines, rotary tables, packaging machinery, and automated production lines.

Customization Support

Supports customized shaft dimensions, flange designs, brakes, encoder options, communication protocols, and voltage configurations to fit OEM equipment requirements.

Engineering-Based Selection

Motor and drive recommendations are provided based on load conditions, speed range, duty cycle, and installation requirements rather than standard specifications alone.

Reduced Integration Time

A matched motor-drive solution helps simplify commissioning, parameter tuning, and system integration during machine development and installation.

Optimizing Systems with Dynamic Field-Oriented Control & Custom Hardware Configurations

FAQ

Q: What information should I provide when requesting a quotation?

A:

Please provide required torque, speed range, supply voltage, installation dimensions, load inertia, encoder requirements, and operating conditions. These parameters help suppliers select the appropriate servo motor and drive configuration.

Q: How do I choose the right torque rating?

A:

The motor should be selected based on continuous torque, peak torque, acceleration requirements, and load characteristics rather than power alone.

Q: Can the servo motor be customized for OEM equipment?

A:

Yes. Common customization options include shaft dimensions, mounting flanges, holding brakes, encoder types, protection ratings, and communication interfaces.

Q: Is a gearbox necessary for high torque applications?

A:

Not always. Direct-drive systems are suitable for applications requiring high positioning accuracy, while gearboxes are often used when additional output torque is needed.

Q: How can I evaluate motor performance beyond the datasheet?

A:

Review torque-speed curves, overload capacity, thermal rise data, encoder specifications, and operating performance under continuous load conditions.

Q: Why choose a supplier that offers both servo motors and servo drives?

A:

Motor-drive matching can simplify commissioning, improve control response, and reduce integration time during equipment development and installation.

Conclusion: Engineering Procurement Perspective

High torque AC servo motor selection is not determined by general performance labels, but by measurable parameters such as torque constant, thermal resistance path, encoder resolution, and closed-loop control behavior under load variation. Among Chinese manufacturers, Zhejiang Tonghang E-Drive Technology Co.,Ltd. focuses on motor-drive integration where electromagnetic design and servo control tuning are optimized as a system rather than separate components.

For procurement teams, the next step is not comparison at specification level alone, but system-level matching between load profile, duty cycle, and servo control architecture. If required, suppliers typically provide torque curve mapping, thermal simulation data, and encoder interface compatibility reports for system integration evaluation.