T3C Series

T3C Series Absolute Value Servo Drivers

The T3C series serial communication absolute servo driver adopts advanced full digital control and AC motor vector control theory, with excellent system performance and high reliability, and is widely used in various general automation machinery.

T3C series Product features

• The driver instruction type is pulse type, and the motor position feedback is a serial communication absolute value encoder
• Adopting high-performance ARM main control chip, with excellent control performance
• Suitable for 17 bit/23 bit serial communication absolute encoder, with high positioning accuracy and good servo axis rigidity
• Fully sealed design, good protection, strong anti-interference ability
• Choose the latest industrial grade IPM module with strong overload driving capability
• Integrating position control, speed control, and torque control
• Can drive various types of permanent magnet synchronous servo motors
• Equipped with comprehensive fault protection and status monitoring functions
• Has excellent low-speed torque characteristics and dynamic acceleration and deceleration performance

 

 

 

 

Driver Installation Dimension Diagram (unit: Mm) 

Driver size one (model T3C-L15/L20)

Figure 1 Size diagram of T3C-L15/L20 servo drive (unit: mm)

Driver size two (model T3C-L30)

Figure 2 Dimension diagram of T3C-L30 servo drive (unit: mm)

Servo Drive Wiring Diagram

T3C-L15/L20 Wiring diagram

T3C-L30 Wiring diagram

Control Wiring Diagram

Special attention:

• If the pulse command signal is a 24V power supply, PULS+must be connected to pin 39 of CN1, and SIGN+must be connected to pin 38 of CN1, otherwise it may damage the pulse command port;
• If the pulse command signal is a 5V power supply, PULS+must be connected to pin 25 of CN1, and SIGN+must be connected to pin 24 of CN1, otherwise there may be abnormal pulse reception;