Z5MJ-040 Series

Industrial automatic door servo control system manufacturer

 

adopts high-precision servo motor, positioning error <1mm, and adjustable switching speed of 0.1-1.5m/s; supports multi-door adaptation (translation/rotation/rolling shutter), equipped with anti-interference algorithm, and adapts to complex industrial environments; has anti-pinch protection and fault self-diagnosis to improve safety and operation and maintenance efficiency. 

Technical Data of Z5MJ-040 Series / Z5MJ-040 Series Technical Parameters
Technical description/Parameter values
Specifications	Z5MJ-040	Power output	0.4KW
Input Voltage	220V±10%	Input Frequency	50Hz
Motor Rated Current	3.0A	Motor Rated Torque (N·m) (Motor with 5 pole pairs)	1.3 N·m (3.0x Overload Capacity) 1.3N.M(3.0倍过载)
Motor Rated Maximum Speed (RPM) (Motor with 5 pole pairs)	3000rpm	Motor Rated Torque (N·m) (Motor with 4 pole pairs)	/
Motor Rated Maximum Speed (RPM) (Motor with 4 pole pairs)	/	Motor Protection Rating	IP65
Standard Power Line/ Encoder Cable Length (m)	3.5m	Limit Switch (Encoder) (Magnetic Encoder Bit)	17-bit Multi-turn Absolute Encoder 17位多圈绝对值编码器
Self-locking Method	/	Ambient Temperature (℃)	(-20~50)℃
Control Box Dimensions (mm)	362 mm (L) × 195 mm (W) × 120 mm (H)	Motor size	Refer to Dimensional Drawing for Accuracy
Reducer	RV50
Control Panel Functions
Display Screen	4.3-inch Programmable Touchscreen	Door Opening/Closing Speed Setting (RPM)	Motor Rated Speed
Door Opening/Closing Acceleration/Deceleration Setting (ms)	/	Automatic Door Closing Delay Time (s)	0-300秒(s)
Partial Door Opening Height (%)	Customizable Height within Limit Range	Operation Status Display Selection	Main Interface
Control Panel Expansion Functions
Language Display	Chinese & English Chinese & English (Other languages customizable)	Historical Fault Inquiry	(√)
Jog Mode	(√)	Motor Forward/Reverse Operation	(√)
Interface Logic Switching (NC/NO)	(√)	Low Temperature Anti-freeze Function	(√)
Control Box Interfaces
Network Communication Interface	RS485	Safety Protection Signal Input	Emergency Stop Action
Automatic Full Opening Signal Input	(√)	Partial Open Signal Input	(√)
Single-button Cycle Control	(√)	Interlock Input	(√)
Programmable Relay Output	2 Sets (Expandable)	Programmable Diode Output	2 Sets (Expandable)
Manual/Automatic Switching Input	Touchscreen Switching	Emergency Stop Input	(√)
Supported limit types	Motor with Built-in Multi-turn Absolute Encoder

 

Z5MJ-040 Motor Adaptation Suggestions
Motor Power	Gearbox Ratio	Applicable Area for Ø114 Roller	Applicable Weight for Ø114 Roller	Applicable Area for Ø140 Roller	Applicable Weight for Ø140 Roller
400W	1:25	＜8 m²	＜30 kg	＜6 m²	＜25 kg

Are you worried that your Industrial Automatic Door Servo Control System will have these problems?

 

Logistics and warehousing customers: "Have you ever encountered such a problem? The park channel door opens and closes 1000+ times a day, the servo motor frequently overheats and stops, each maintenance delays 2 hours, and 3 trucks of goods are unloaded less a day?"

Food/pharmaceutical workshop customers: "Does the door servo system of the clean workshop cause dust to enter due to poor sealing? Every time it is inspected and disinfected, the loss of a single batch exceeds 10,000 yuan?"

Explosion-proof workshop customers: "Does the door control system of the oil and gas warehouse fail to meet the Ex certification standards and is required by the security inspection department to rectify, delaying production progress?"

Low-temperature cold chain customers: "Does the door of the -30℃ cold storage often fail due to low-temperature servo drive failure, causing door jams and cold air leakage, consuming 500 kWh more electricity every day?"

 

TONGHANG product core advantages

 

Application scenarios	Customer core demands	Product Corresponding Features	Specific value brought
Logistics/freight channel	Fast opening and closing (improving traffic efficiency), high-frequency operation (average 1000+ times per day)	- Servo motor response speed ≤ 0.1s (starts within 0.1s after receiving the signal) - The driver adopts a double-bearing design, with a continuous operating life of ≥ 100,000 hours (industry average 70,000 hours)	The daily traffic efficiency of a single door increased by 20% (more than 50 vehicles/day), and the downtime caused by motor failure was reduced by 30%
Food/pharmaceutical clean workshop	Anti-corrosion, no sanitary dead corners, compliant with GMP certification	- Servo motor protection level IP69K (can withstand high-pressure water jet flushing) - Driver housing seamless design, no dead corners for dust accumulation	Avoid workshop re-inspections due to equipment contamination, reducing 2-3 production stoppages for disinfection each year
Explosion-proof workshop (oil and gas/chemical)	Explosion-proof certification, stable operation (no spark risk)	- Motor + driver is Ex dⅡCT4 explosion-proof certified - Brushless design, no mechanical friction sparks during operation	Comply with safety and regulatory requirements and avoid fines due to non-compliant equipment
Ultra-large door (width 6m+)	Stable load-bearing and anti-swaying	- Servo motor torque redundancy design (1.5 times rated torque) - Driver built-in "load adaptive algorithm" to compensate for door shaking in real time	Prevent door deformation due to uneven force and extend door life by 30%

 

How we can give you peace of mind

 

Performance data visualization

 

Attached is the "Life Test Report": "Our servo motor has been running continuously for 3 years without failure in a test simulating 1,500 switches per day, which is equivalent to 1.5 times the industry standard life";

 

Attached is the "Energy Consumption Comparison Table": "The use of vector control technology saves 25% of electricity compared to traditional asynchronous motor systems, and 100 doors in a logistics park save 80,000 yuan in electricity costs each year."

 

Our cases:

 

"The automobile welding workshop (high temperature + dust environment) uses our servo system, and the door opening and closing speed is increased from 0.8m/s to 1.2m/s, 15 more material vehicles can pass through per hour, and the annual production capacity is increased by about 5,000 units";

"The biopharmaceutical workshop (GMP Class 8) uses our IP69K protection system and has passed the drug supervision inspection for 2 consecutive years without excessive dust caused by the door control system";

"The oil field explosion-proof warehouse (Ex dⅡCT4 requirements) has been used for 3 years with zero safety accidents, and the operation and maintenance cost is only 1/3 of the previous system."

 

Our guarantee

 

Integration convenience:

 

Supports mainstream industrial buses such as Profinet/EtherCAT, no additional conversion module is required, and wiring time is shortened by 40%;

Standard debugging software, built-in 10+ scene parameter templates (such as logistics/cleanliness/explosion-proof), automatically generates parameters after entering the door size, and the debugging time is reduced from 8 hours to 2 hours.

After-sales guarantee:

 

Promise of 24-hour response

The core components (motor/driver) have a 3-year warranty, far exceeding the industry's 2-year standard. If there are quality problems during this period, they will be replaced free of charge + installation costs will be borne;

Provide spare machine service: Contracted customers can apply for 1 spare servo system, which will be replaced first and then repaired in case of failure to avoid downtime losses (a logistics park once reduced downtime by 8 hours and recovered losses of 20,000 yuan).