T5a Series
T5a Series Absolute Value Servo Drivers
The T5a series absolute AC servo drive is independently developed and produced by Zhejiang Tonghang Electric Drive Technology Co., Ltd. It is a high-precision servo drive product with leading domestic level. This series of products adopts advanced full digital control and AC motor vector control theory, with excellent system performance and high reliability. It is widely used in servo axis drive of CNC machine tools, textile machinery and other general automation industrial machinery.
T5a series Product features
- The driver instruction type is pulse type, and the motor position feedback is pulse incremental encoder
- Adopting high-performance ARM main control chip, with excellent control performance
- Suitable for 17 bit or 23 bit multi turn absolute encoders, with high positioning accuracy and good servo shaft rigidity
- Fully sealed design, good protection, strong anti-interference ability
- Integrating position control, speed control, and torque control
- Can drive various types of permanent magnet synchronous servo motors
- Has excellent low-speed torque characteristics and dynamic acceleration and deceleration performance





Absolute Value Servo Drive Standard Specifications and Performance Parameters
|
Model |
L20 |
L30 |
L40 |
L50 |
L75 |
H25 |
H50 |
H75 |
|
|
Input power supply |
Main power supply |
Single phase 220VAC -15%~+10% 50/60Hz |
Three phase 380VAC -15%~+10% 50/60Hz |
||||||
|
Environ-ment |
Temperature |
Work:0℃~ 40℃ Storage:-40℃~ 50℃ |
|||||||
|
Humidity |
Work:40% ~ 80%(No condensation) Storage:Less than93%(No condensation) |
||||||||
|
Atmospheric pressure |
86kPa ~ 106 kPa |
||||||||
|
Protection grade |
IP20 |
||||||||
|
Control model |
Position, speed, torque, position/speed, speed/torque, position/torque |
||||||||
|
Digital input |
8 programmable input terminals (optically isolated) |
||||||||
|
Digital output |
4 programmable output terminals (optically isolated) |
||||||||
|
Encoder signal output |
Signal types |
A, B, Z differential output(A+/A-/B+/B-/Z+/Z-) Z signal collector open output RS485 communication reads the feedback encoder position |
|||||||
| position |
Input frequency |
Differential input:≤500kHz(kpps);Single-ended input:≤200kHz(kpps) |
|||||||
| Command mode | Pulse+symbol;Forward/reverse pulse, Orthogonal pulse | ||||||||
|
Electronic gear ratio |
1~32767/1~32767 |
||||||||
|
Speed |
Simulate command input |
0~10VDC,The input impedance10kΩ |
|||||||
|
Command acceleration and deceleration |
Parameter settings P-060/P-061 |
||||||||
| Instruction source |
Analog quantity, internal speed command |
||||||||
|
Torque |
Analog command input |
±10vDc,inputimpedance 10k Ω | |||||||
|
The torque limit |
Parameter settings P-060/P-061 | ||||||||
|
Sources of instruction |
Analog quantity,internal speed command | ||||||||
|
Monitoring function |
Speed, current position, position deviation, motor torque, motor current, command pulse frequency, etc |
||||||||
|
Protection function |
Over-speed, overvoltage, over-current, overload, brake anomaly, encoder anomaly, position error, command over-frequency, etc |
||||||||
| Characteristic | Speed freguency response |
≥1.6kHz |
|||||||
| Speed fluctuation rate | 士0.03%(load0-100%)<士0.02%(powersupply-15%~+10%) | ||||||||
T5a Series Servo Drive External Dimensions (mm)




Servo Drive Wiring Diagram


Control Wiring Diagram

Attention:
·If the pulse command signal is 24V power supply, PULS+ must be connected to pin 39 of CN1, and SIGN+ must be connected to pin 38 of CN1, otherwise the pulse command port may be damaged.
·If the pulse command signal is 5V power supply, PULS+ must be connected to pin 25 of CN1, and SIGN+ must be connected to pin 24 of CN1, otherwise the pulse reception may be abnormal.
Product Series and Selection Guide










Zhejiang Tonghang E-Drive Technology Co., Ltd. is one of the leading t5a series manufacturers and suppliers in China. We warmly welcome you to buy the best t5a series at competitive price from our factory. For more company information, contact us now.
servo drives